D-Link DES-1024R 24-Port Fast Ethernet Unmanaged Switch Rack 10/100 | Wty

D-Link DES-1024R — 24-Port 10/100 Unmanaged Rackmount Switch

The D-Link DES-1024R is a 24-port Fast Ethernet (10/100BASE-TX) unmanaged switch in a 1U rackmount chassis. Plug in and every port is active immediately — no IP address, no web interface, no CLI setup. Backed by a 12-month Reboot IT warranty.

Key Benefits

• 24 Fast Ethernet ports: 24× 10/100BASE-TX auto-negotiating ports connect workstations, printers, and other 10/100 Ethernet devices with zero speed configuration.
• Zero configuration: Completely unmanaged — no IP address, no login, no setup. Power on and all ports are active immediately.
• Auto MDI/MDI-X: Eliminates the need for crossover cables — connect devices directly with standard patch cables regardless of device type.
• Full and half duplex: Auto-negotiates duplex mode for each connected device — compatible with all standard 10/100 Ethernet equipment.
• 1U rack-mountable: Fits standard 19-inch racks with included rack ears — clean deployment in comms rooms and network cabinets.
• Low running cost: Unmanaged switches consume minimal power and require no management overhead — ideal for isolated workgroup segments with predictable traffic.

Performance in Use

The DES-1024R suits legacy Fast Ethernet workgroups, factory floor device networks, lab environments, and any segment where 10/100 connectivity is adequate and management overhead is unwanted. For printers, older workstations, IP cameras running at 100Mbps, or VoIP phones that don’t need Gigabit, a 24-port 10/100 switch costs less to buy and run than a Gigabit equivalent.

Unlike the DES-1024R+, this model does not include an expansion module slot. If you need an optional uplink module bay for additional connectivity, see the DES-1024R+. For this model, connectivity is limited to the 24 base ports plus a standard uplink if your environment needs one via the built-in auto-MDI/MDI-X crossover support.

Technical Specifications

Specification	Details
Model	D-Link DES-1024R
Ports	24× 10/100BASE-TX (RJ45), auto-negotiating
Expansion Slot	None (see DES-1024R+ for expansion slot model)
Management	Unmanaged (plug-and-play)
Duplex	Full and half duplex, auto MDI/MDI-X
Form Factor	1U rackmount (19-inch), rack ears included
PoE	None
Warranty	12 months — Reboot IT

Is It Right for You?

Best For ✓	Not For ✗
Legacy 10/100 workgroup expansion or replacement	Gigabit speed requirements (10/100 only)
Zero-management segment isolation	VLAN, QoS, or management features (unmanaged)
Lab, training, and test network environments	PoE device connections (no PoE support)
Simple rack-mount Fast Ethernet port expansion	Uplink expansion slot (no module slot — see DES-1024R+)

Condition Grades

Grade	Cosmetic	Testing
A — Excellent	Minimal marks, near-new appearance	All 24 ports verified functional
B — Good	Light wear, fully functional	All 24 ports verified functional

Frequently Asked Questions

Is this a Gigabit switch?

No — the DES-1024R is a Fast Ethernet switch with 10/100BASE-TX ports only. Maximum speed is 100 Mbps per port. For Gigabit, see the D-Link DGS series or similar Gigabit models.

Does it need any configuration?

No — the switch is completely unmanaged. Plug in the power and Ethernet cables and all 24 ports are active. There is no IP address, web interface, or login required.

What is the difference between the DES-1024R and DES-1024R+?

The DES-1024R+ has an additional expansion module slot for optional uplink modules. The DES-1024R does not have this slot — the 24 base ports are the full configuration.

Does it support PoE?

No — this switch does not support Power over Ethernet. If PoE is required, see the D-Link DES-1228P or HP/Cisco PoE switch alternatives.

What shipping costs apply?

Shipping costs apply based on size and destination — rates are calculated at checkout.