Fortinet PIN060-54PR 60W PoE Injector 54V Power Adapter FortiSwitch | Wty

Fortinet PIN060-54PR — 60W 54V PoE Injector for FortiSwitch & FortiAP

The Fortinet PIN060-54PR is a 60-watt 54-volt 802.3bt Power over Ethernet injector designed for Fortinet FortiSwitch and FortiAP devices. It powers high-wattage network devices over a single Ethernet cable, eliminating the need for a local power socket at the device location. Backed by a 12-month Reboot IT warranty with free standard AU shipping.

Key Benefits

• 60W PoE output: Sufficient power for demanding devices including multi-radio access points and powered switches
• 54V output voltage: Matched to Fortinet device power requirements for reliable, compatible operation
• 802.3bt compliant: Supports the latest PoE++ standard for maximum device compatibility
• Single-cable installation: Power and data over one Ethernet run — no additional power outlet needed at the device
• Fortinet compatibility: Designed for FortiSwitch, FortiAP, and compatible Fortinet 802.3bt powered devices
• Plug-and-play: No configuration required — connect between the switch port and the powered device

Performance in Use

PoE injectors are the practical solution when you need to power a network device at a location without a nearby power point — ceiling-mounted access points, outdoor cameras, IP phones at remote desks, or wall-mounted FortiSwitch units. The PIN060-54PR sits between your existing switch and the powered device: Ethernet in from the switch, Ethernet and power out to the device, AC power in from a standard wall outlet.

At 60W, the PIN060-54PR has the headroom to power high-demand FortiAP access points and entry-level FortiSwitch units. The 54V output is matched to Fortinet's power architecture, making it the correct injector for Fortinet hardware rather than a generic alternative that may supply incorrect voltage.

For field deployments and retrofits where a PoE switch is not available or impractical to install, the PIN060-54PR provides a cost-effective single-port PoE solution that integrates cleanly into any Fortinet networking environment.

Tech Specifications

Model	Fortinet PIN060-54PR
PoE Output Power	60 Watts
Output Voltage	54V DC
PoE Standard	IEEE 802.3bt (PoE++)
Data Port	Gigabit Ethernet (10/100/1000)
AC Input	100–240V AC, 50/60Hz
Compatible Devices	FortiSwitch, FortiAP, and 802.3bt compatible devices
Configuration	Plug-and-play — no setup required
Warranty	12 months (Reboot IT)

Is It Right for You?

Best For ✓	Not For ✗
Powering FortiAP or FortiSwitch without a PoE switch nearby	Non-Fortinet devices that may use different voltage
Ceiling or wall-mounted AP installations	Multi-port PoE delivery (single port only)
Retrofit scenarios without accessible power points	Devices requiring standard 48V PoE (may be incompatible)
Fortinet network deployments needing a spare injector	Consumer networking environments

Condition Grades

Grade	Condition
A — Excellent	Minimal cosmetic marks, PoE output and data pass-through tested. 30-day hardware warranty.
B — Good	Light wear. Fully functional. 30-day hardware warranty.

Frequently Asked Questions

Will this work with non-Fortinet PoE devices?

The PIN060-54PR is designed and tested for Fortinet FortiSwitch and FortiAP devices. While it is 802.3bt standard, the 54V output may differ from the 48V used by some third-party devices. Verify your device's power requirements before use.

Does it affect data throughput?

No. The injector passes data at Gigabit Ethernet speeds (up to 1Gbps) — it only adds the PoE power signal and does not throttle bandwidth.

What cable length can I use between the injector and the device?

Standard Ethernet cable length limits apply — up to 100 metres (328 feet) from injector to powered device, including the cable from the upstream switch to the injector.

Does it come with an Ethernet cable?

No. Ethernet cables are not included. Standard Cat5e or Cat6 patch cables are required for both the input (from switch) and output (to device) connections.

What is the warranty?

All Reboot IT products include a 12-month warranty. If a hardware fault develops within 12 months, we repair or replace at no cost.

Does this ship free?

Yes — free standard AU shipping is included on this item.

12-Month Warranty & Free AU Shipping

Every Fortinet PIN060-54PR sold by Reboot IT carries a full 12-month warranty and ships with free standard AU shipping. We've been supplying enterprise networking equipment since 2001 from our Melbourne workshop. Each unit is tested for PoE output and Ethernet pass-through before dispatch. Visit us at reboot-it.com.au for our full range of Fortinet accessories.